Ben Carver DIY tool reviewer at DrillAlign • About the author The one small thing that usually causes the problem Most cabinet hardware jig mistakes start with one small issue: you reference from the wrong edge (or you flip the jig and forget to re-zero). That single slip quickly turns into cabinet hardware hole layout…
How to drill cabinet door handles straight (and keep every pull lined up) comes down to one thing: a repeatable layout you don’t “eyeball.” If you’ve ever stepped back and thought “why do these look slightly off?”—that’s almost always a reference-line problem, not a drilling problem. In this guide you’ll learn how to drill cabinet…
Cabinet hardware placement is one of those jobs where a tiny mistake looks huge. You only get one first hole—and once you drill, you’re committed. This guide is the “do it once, do it right” method for cabinet hardware placement: simple measurements, a repeatable template, and fixes for the common mess-ups (without overthinking every door)….
The two-hole mistake you only make once You mark your pull, drill the first hole, and everything feels fine. Then the second hole is off by just a hair… and the handle sits crooked forever unless you plug, sand, and repaint. A cabinet hardware jig is basically cheap insurance against that moment. This page helps…